Flames alpha pattern (10 base strings)
10 base + 4 knotting strings · 4 colours · base about 45 cm
Your colours
Tie along
Floss in hand? Tap Next.Alpha chart
Tap a column to jump to that rowRow 1 → · 1 Bright Red, 8 Black, 1 Bright Red
Each square is one knot and rows run left to right. The highlighted column is the row you tie now.
How this pattern works
Flames makes a fire shape with four colours across 10 base strings, using 4 knotting strings. Its medium difficulty suits you if you can keep track of a changing colour order. For a 16 cm bracelet, the base strings are about 45 cm; the knotting strings take several metres in total, tied with pieces of about 150 cm.
Lay the base strings in the order shown by the colour chart, with colour 1 as the background. The chart is 10 strings wide and uses four colours. Work each row back and forth: the first row moves left to right with forward knots, and the next moves right to left with backward knots. Follow the chart for the knot type and colour at every position; this is an alpha pattern, so the knotting strings travel across the base strings to build the picture.
The flame shape comes from the changing colour placements in the rows. Black (DMC 310) fills much of the background, while Bright Red (DMC 666), Tangerine (DMC 740) and Canary Bright (DMC 973) create the flame. The chart repeats after 12 rows. Each repeat uses 67 Black knots, 24 Bright Red knots, 23 Tangerine knots and 6 Canary Bright knots, so the dark background remains prominent around the smaller, shifting areas of fire.
Tips for this pattern
- Keep the flame readable by choosing colours with clear contrast. The default dark background and red, orange and yellow flame colours separate well; if you change them, make sure the flame shades still stand apart from colour 1.
- The chart changes colour placement as the flame rises, so it is easy to lose your place near its edges. Check the next chart row before tying, especially when a flame colour appears for only a few knots.
- Use the tie-along stepper to check your position after each row. The rows alternate direction, and the 12-row repeat gives you a clear point to confirm the chart and bracelet still match.
Questions about Flames
How many strings does the Flames alpha pattern use?
Flames uses 10 base strings and 4 knotting strings. Its chart is 10 strings wide and has four colours. Follow the chart and tie-along stepper for the colour and knot at each position.
How many rows are in one Flames repeat?
One repeat is 12 rows. The rows go left to right, then right to left, alternating forward knots and backward knots as shown by the chart.
How long should I cut the strings for a 16 cm Flames bracelet?
Flames takes 10 base strings of about 45 cm for a 16 cm band. Of its 4 knotting strings, Black does most of the knotting and needs about 7.4 m in all, so tie it in 5 pieces of about 150 cm; the others need Bright Red about 4.3 m, Tangerine about 4.2 m, Canary Bright about 2.9 m.
Knots in this pattern
Alpha patterns are tied with forward and backward knots, one row at a time.
Make a matching pair
Tie the same bracelet for a friend: same colours, swapped colours or a mirror image, with one cut list for both.
Open the matching pair makerAdd a name
Spell a name in pixel letters on top of this kind of bracelet and get its cut list.
Open the name bracelet makerMake your own
Three ways to a bracelet that is yours alone.